Do you want to learn how to vacuum algae out of a pool? If yes, there are things that you should do first. For instance, you cannot remove algae if you have not removed all the debris from your pool using a net. Then you should add chemicals to the water and brush the walls and the surfaces.
When all the algae are settled at the bottom of the pool, you can start doing some in-floor pool cleaning. But can you vacuum algae out of a pool? Yes, you can do this through two methods: through filters or through pool to waste.
The Waste Method
If you’ve been looking for the easiest method for removing dead algae at bottom of pool, this is it. All you need to do is bypass the filter and pool vacuum for algae to the waste. However, this can only work if you have a multiport system or a waste line system in your cartridge filter.
Vacuum the pool to waste after you have set up the waste, and the debris and algae will get out of your pool. In case the water level lowers to 6 inches below the pool tile, stop the process immediately. Then turn the waste system off and fill the pool with water before repeating the entire process.
The Filter Method
This is how to get algae off bottom of pool when you have no other alternative. Ensure you use an old cartridge so that you can dispose of it once you are done cleaning the algae. Can you vacuum algae out of a pool using this method? Yes.
Merely follow the normal vacuuming process. Check to see if dead algae or any dirt is flowing back into the pool. If this happens, clean the cartridge and continue. However, if this keeps happening, seek a common pool repair service professional to attend to your filter.
Once all the algae are gone, refill the pool with water. If your pool has a multiport valve, restart your pool system in stages. This will keep dirty pump algae from flowing back into your clean pool.
How To Do It:
This is a guide on how to get algae out of pool. Start by rinsing and backwashing the filter. Check the discharging water as you run the filter through the cycle three times to make sure it is clean. Make sure the DE is added to the filter and run the system for 12 hours.
Make sure there are no air bubbles in the pool system, remove the old filter element from your cartridge, add the new one into the system, then add one jug of bleach in the pool and a half-gallon of acid. Leave the pool for 24 hours before use.
This is bound to remove any dead algae in pool. Remember to seek professional help if your DE filter needs the annual disassemble and clean or if you need guidance on bleeding air out of your system.
Point To Note:
Can you vacuum algae out of a pool yourself? If you can’t and need help or are remotely unsure of the steps to take, get professional help. Do not damage your pool filter or your pool.